Wireless Control Manufacturer Long Range Remote radio I/O

Wireless Controls and Automation

Industrial Wireless Radio Controls

Panel Mount Ready

Performance
■ 30 dBm High power transmitter
■ 2 Mile (3.km) line-of-sight 938432 ant.
■ Optional long range 5 Miles ( 8 km )
■ Input Dry isolated contact N/O
■ Relay output 6 Amp 240V/30V

Installation features
■ Operation license-free 433MHz ISM band
■ Easy installation, No programming
■ Panel mount or clip onto DIN-35mm rail
■ Dimensions

Operation Transmitter Receiver

Continuous: Close switch
Open switch Relay ON
Relay OFF

■ Applications:
Industrial Monitoring,
Pump control, Monitor remote
instruments, sensors, Tank level
Lighting, Mobile systems,
PLC remote, SCADA,
Factory process control
Generators. Remote alarms.
Solar, Wire replacement

■ Specifications

■ Option Battery Backup UPS

Modular Transmitter & Receiver 12V

■ Wiring Example 12VDC*

1 CH 931281 ■ Picture $899.99

2 CH 931282 ■ Picture $989.99

Add the Antennas Two required

Modular Transmitter & Receiver 120/220VAC

■ Wiring Example 120/220VAC*
1 CH 932281 ■ Picture $999.95

2 CH 932282   ■ Picture $1199.95

4 CH 932284 ■ Picture   Request a Quotation

Add the Antennas Two required

Specifications Digital Transmitter

Supply power	12 VDC @ 400 mA
Inputs	N/O Normally Open, digital dry contact
Transmitter power	30 dBm, per FCC Part 15.249, 50mV/m @ 3m
Transmission	Digital Encoded Gaussian_frequency-shift_keying
Channels	16 addresses per system GFSK
Input Wiring	Din Terminals, Dry Contact
Response	Loop 500 msec
Weight	0.8 lb (0.40kg) each unit
Dimensions	4.50 x 3.50 x 3.25 in. / (114.30 x 88.90 x 86.75 mm)

Specifications Digital Receiver

Supply power	12 VDC @ 300 mA
Output	Relay 6.Amp, 30V/240vac Class 2 pilot duty
Frequency	433 MHz • License free Industrial ISM band
Configuration	DIP switch factory preset
Compliance	FCC CFR part 15.247, 95 sub E
Wiring	Screw Terminals
Antenna Z	50 Ohm SMA RF connector
Ambient temp	14° to 140° F (-10° to 60° C)
DIN Rail	IP22, UL94-5VA, DIN mount 35mm or panel mount

930080 series

DISCLAIMER: Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

Antenna Selection ( TWO are required )

938433 Yagi antenna 12 E

14 dBi 5 Mile+
Length: 43", Weight: 3.lb
Impedance 50 ohms N terminal
Vertical beam 45 degrees -
Horizontal beam 50 degrees
10 ft coax cable and connector

  938433 $369.99

938455, 5 E Yagi Antenna

Gain 9 dBi, 3 Mile+
433 MHz, Rating: 150 Watts
Impedance 50 ohms N terminal
Vertical beam 55 degrees -
Horizontal beam 60 degrees
Base Length: 32", Weight: 4.0lb
10 ft coax cable and connector

  938455 $249.99

Omni directional base antenna 938450

Gain: 5 dBi,   2 Mile+

433 MHz, Rating: 100 Watts
Impedance 50 ohms N terminal
Vertical beam 45 degrees With N female termination
Length: 34", Weight: 3.0lb
10 ft coax cable and connector

  938450 $199.95

938432 Yagi antenna 3 E

938432   Yagi antenna 3 E

Gain 7 dBi, 2 Mile+
433 MHz, Rating: 150 Watts
Impedance 50 ohms N terminal
Vertical beam 55 degrees -
Horizontal beam 60 degrees
Base Length: 32", Weight: 4.0lb
10 ft coax cable and connector

  938432 $179.99

938092   14" Omni Antenna

3 dBi  1500ft line of sight
10ft coax cable SMA

  938092 $39.99

938091   6" Omni Antenna

0 dBi Short range
5ft coax cable SMA

  938091 $19.99

Add   Accessories:

Contactors 933020 Miniature Contactor

20A, 3 Pole, 12VDC Coil
2HP @240V, 7.5HP @460V
1HP @120V,  4 KW@ 220V
20Amp AC-1, 12Amp. AC-3
1 N.O. Aux.,
Dimension: 1.7 x 2.5 x 2.3 in
(45 x 64 x 58 mm)
Surface or DIN rail mountable

  933020 $52.99

7 Day 24 Hour Timer

7 Day 24 Hour Timer
DIN rail, Manual - Auto
SPDT 16A, 250V Pilot Duty,
Dim: 3.5H, 1.5W, 2.7D inches
3 Year Battery backup,
16 time schedules

Manual

12VDC

934012 $49.99

934135
Multi function Timer or Latch

Electronic timer DIN mount
Time from 0.1s to 10 days
SPDT relay 10A N.O. and N.C
12,24 VDC 24,110,220 VAC
Specifications

934135 $98.99

Mechanical Float Switch

  930650 $69.99

.